DEEP_NNN
Shared on Sat, 10/02/2010 - 19:10Counting failure!
There are, sorry, would have been, 30 upright sarsen stones (orthostats) in the outer ring of Stonehenge. I know that. I breathe that. Apparently, I can't count that!
When I began construction I used the same respawn area diameter as I did in Halo 3. I forgot to check if it was the same real world diameter in REACH. I proceeded to layout the blocks. Each upright is approximately 2 metres wide and the spacing between stones is 1 metre. I used a tall 1x1 to get the spacing. After completing the circle of stones I "thought" I counted 30 in total. Everything was working out pretty good and, I got lax. Remember that picture I showed you in my last Blog? Yeah, 27 stones.
Not good enough.
My first re-do is underway but just barely. While I'm at it I can take into account the following issues.
1. Raise the whole playing field above that gigantic stone because it and the larger diameter circle conflicted. I was having issues with it anyway. Stinking rock.
2. Change the centering of the circle to allow ample and equal room for a Warthog to pass between the ring and the cliff.
3. Allow for below grade passageways which weren't possible at sea level.
4. Leveling issues with walls as floors. I hope I find a solution. Did you know tires screech on walls? Fume.
http://i16.photobucket.com/albums/b41/DEEP_NNN/reach_4534107_Full.jpg
If this pictures is visible, you can see the newer and much higher playing field I am experimenting with. Click the link if it isn't.
- DEEP_NNN's blog
- Log in or register to post comments
Comments
Submitted by doorgunnerjgs on Sat, 10/02/2010 - 21:34